Staud, D.; Merklein, M.:
Zug-Druck-Versuche an Miniaturproben zur Erfassung von Parametern für kinematische Verfestigungsmodelle.
In: Borsutzki, M.; Geisler, S. (Edt.): Deutschland, 2(2009), Düsseldorf, Deutschland: Verlag Stahleisen GmbH, in print

Merklein, M.; Wieland, M.; Staud, D.:
Friction Stir Welds Made Out of Precipitation Hardenable Aluminum Alloys - Experimental Investigations of Formability Potential.
In: Boogaard, Akkerman (Edt.): Proceedings ESAFORM 2009, (2009), Paris: Springer, pp. 323-236

Staud, D.; Merklein, M.:
Inverse Approach to the Forming Simulation of Tailored Heat Treated Blanks .
In: International Journal of Material Forming , (2008), Paris, France: Springer Verlag, pp. 1-4

Staud, D.; Merklein, M.:
Formability Improvement with Tailored Heat Treated Blanks through an Inverse Simulation Approach.
In: Hora, P. (Edt.): Proceedings of the 7th International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes , (2008)7, pp. 611-614

Diehl, A.; Staud, D.; Engel, U.:
Mechanical Characterisation of Metal Foils by Hydraulic Bulge Test.
In: steel research international 79, Special Edition Metal Forming Conference 2008 , 1(2008), Düsseldorf, Deutschland: Verlag Stahleisen GmbH, pp. 332-339

Diehl, A.; Staud, D.; Engel, U.:
Investigation of the mechanical behaviour of thin metal sheets using the hydraulic bulge test.
In: Menz, W.; Dimov, S. (Edt.): Proceedings of the 4th International Conference on Multi-Material Micro Manufacture, (2008), Dunbeath, Scotland, UK: Whittles Publishing, pp. 195-198

Geiger, M.; Micari, F.; Merklein, M.; Fratini, L.; Giera, A.; Staud, D.; Contorno, D.:
Friction stir knead welding of steel aluminium butt joints.
In: International Journal of Machine Tools & Manufacture, (2008)48, Elsevier Verlag, pp. 515-521

Merklein, M.; Staud, D.; Vogt, U.:
Tailored Heat Treated Blanks applied on car body parts under quasi-series conditions.
In: International Journal of Microstructure and Material Properties, (2008), accepted

Al-Sheyyab, A.; Cojutti, M.; Kägeler, C.; Staud, D.; et al.:
Flächige Leichtbauteile: Anwendungsmöglichkeiten im Automobilbau.
In: Konstruktion, 60(2008), Düsseldorf, Deutschland: Springer Verlag, pp. 78-82

Geiger, M.; Merklein, M.; Staud, D.; Kaupper, M.:
An inverse approach to the numerical design of the process sequence of tailored heat treated blanks.
In: WGP (Edt.): Production Engineering - Research and Development, (2008)1, Berlin/Heidelberg: Springer, pp. 15-20

Staud, D.; Merklein, M.; Fratini, L.; Buffa, G.:
Investigations on the Mechanical Properties and Formability of Friction Stir Welded and Laser Welded Aluminium Tailored Blanks.
In: Geiger, M.; Otto, A.; Schmidt, M. (Edt.): 5th Laser Assisted Net Shape Engineering LANE, (2007)2, Bamberg: Meisenbach Verlag, pp. 1301-1313

Merklein, M.; Geiger, M.; Staud, D.; Vogt, U.:
Tailored Heat Treated Blanks applied on car body parts under quasi-series conditions.
In: Kuzman, K. (Edt.): Proceedings of the 6th International Conference on Industrial Tools and Material Processing Technologies, (2007), pp. 3-6

Staud, D.; Giera, A.; Merklein, M.; Geiger, M.:
Enhanced numerical results on friction stir welded aluminium butt joints.
In: Proceedings of the 12th International Conference on Sheet Metal (SheMet), (2007), pp. 759-766

Buffa, G.; Fratini, L.; Merklein, M.; Staud, D.:
Investigations on the Mechanical Properties and Formability of Friction Stir Welded Tailored Blanks.
In: Proceedings of the 12th International Conference on Sheet Metal (SheMet), (2007), pp. 143-150

Merklein, M.; Hußnätter, W.; Staud, D.; Kuppert, A.:
Charakterisierung der Umformeigenschaften von Blechwerkstoffen - Trends und Möglichkeiten der Prüftechnik.
In: Pohl, M. (Edt.): Tagungsband Werkstoffprüfung 2007, (2007), Düsseldorf: Stahleisen GmbH, pp. 201-210

Schmidt, M.; Mys, I.; Albert, F.; Merklein, M.; Giera, A.; Staud, D.:
Fortschritte in der Fügetechnik für Aluminium.
In: Proceedings Euroform-Konferenz, Aluminium, Anwendungen, Märkte, Produktion, (2006), published

Geiger, M.; Merklein, M.; Giera, A.; Staud, D.:
Experimental and analytical investigations on friction stir welding of steel aluminium tailored hybrids.
In: Production Engineering. Annals of the German Academic Society for Production Engineering, (2006)8, pp. 81-86

Geiger, M.; Merklein, M.; Staud, D.; Giera, A.:
Verfahren und Simulation zur umformtechnischen Charakterisierung von Tailored Hybrid Blanks.
In: Berichtskolloquium der DFG-Forschergruppe 505, (2005), pp. 40-48

Geiger, M.; Merklein, M.; Giera, A.; Staud, D.:
Eigenschaften reibrührgeschweißter Aluminium-Stahl-Verbindungen.
In: DFG (Edt.): Berichtskolloquium der DFG-Forschergruppe 505, (2005), pp. 30-39

Geiger, M.; Merklein, M.; Giera, A.; Staud, D.:
Reibrührschweißen? ein innovatives Schweißverfahren für Hybridstrukturen mit hohem Umformpotenzial.
In: Neue Materialien Niedersachsen (Edt.): Congress Intelligence Leichtbau Systeme, Hildesheim 07.09., (2005)9, published on CD

Kerausch, M.; Merklein, M.; Staud, D.:
Finite Elemente Analysis for Deep Drawing of Tailored Heat Treated Blanks.
In: Duflou, J.R.; Geiger, M.; Kals, H.J.J.; Shirvani, B.; Singh, U.P. (Edt.): Sheet Metal 2005, Proceedings of the 11th International Conference on Sheet Metal, (2005), Zurich, Switzerland: Trans Tech Publications Ltd., pp. 343-352

Merklein, M.; Giera, A.; Staud, D.:
Friction stir welding and cup deep drawing of aluminium tailored blanks.
In: Banabic, D. (Edt.): Proceedings of the 8th ESAFORM Conference on material forming, (2005), Bucharest: The Romanian Academy Publishing, pp. 273-276