Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Dr.-Ing. Massimo Tolazzi

(former employee)

Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it




Projects


Publications

    2008

    • Tolazzi, M.; Lamprecht, K.; Blankl, A.; Cojutti, M.:
      Tailor Welded Blanks und Patwork Blanks mit Hochdruck in Form bringen.
      MM Maschinenmarkt - Das Industriemagazin (2008)114, pp. 22-25

    2007

    • Tolazzi, M.; Merklein, M.:
      Influence of Pre-forming on the Forming Limit Diagram.
      Key Engineering Materials (2007)344, pp. 113-118

    • Tolazzi, M.; Lamprecht, K.; Geiger, M.:
      Hydroforming of Laser Welded Tailored and Patchwork Blanks.
      In: Geiger, M.; Otto, A.; Schmidt, M. (Edtrs.): LANE, Meisenbach Verlag, 2007, pp. 1295-1302

    • Tolazzi, M.; Merklein, M.:
      Influence of Pre-forming on the Forming Limit Diagram of Aluminium and Steel Sheets.
      In: Micari, F.; Geiger, M.; Duflou, J.; Shirvani, B.; Clarke, R.; DiLorenzo, R.; Fratini, L. (Edtrs.): Sheet Metal 2007, Proceedings of the 12th International Conference on Sheet Metal; Advanced Materials Research, 2007, accepted

    2006

    • Tolazzi, M.; Merklein, M.; Geiger, M.:
      Wirkmedienbasierte Umformng von Tailor Welded Blanks.
      In: Kleiner, M. (Edtr.): Wirkmedienbasierte Fertigungstechniken zur Blechumformung, Abschlussbereicht zum DFG-Schwerpunktprogramm SPP 1098, 28.-29.09., Dortmund, 2006, pp. 275-288

    • Geiger, M.; Neugebauer, S.; Merklein, M.; Lamprecht, K.; Tolazzi, M.; Bahn, V.:
      Innenhochdruck-Umformen von Doppelblechen.
      In: Kleiner, M. (Edtr.): Wirkmedienbasierte Fertigungstechniken zur Blechumformung, Abschlussbereicht zum DFG-Schwerpunktprogramm SPP 1098, 28.-29.09., Dortmund, 2006, pp. 27-44

    • Tolazzi, M.; Lamprecht, K.:
      On the Determination of the Friction Behaviour of Tailor Welded Blanks by Means of a Cylindrical Cup Drawing Test.
      TEEL GRIPS - Journal of steel and related materials 3(2006)4, pp. 201-206

    • Tolazzi, M.; Lamprecht, K.; Merklein, M.:
      Ermittlung des Reibverhaltens von Tailor Welded Blanks im Näpfchenziehversuch.
      In: Buchmayr, B. (Edtr.): Tagungsband zum XXV. Verformungskundlichen Kolloquium 04.-07.03., 2006, pp. 89-100

    2005

    • Geiger, M.; Merklein, M.; Tolazzi, M.:
      Sheet Hydroforming: Analytical Modeling and Experimental Verification of Complex Structures.
      In: (Edtr.): Production Engineering - Annals of the WGP, 2005, pp. 69-72

    • Geiger, M.; Merklein, M.; Tolazzi, M.:
      Metal forming ensures innovation and future in Europe.
      In: Bariani, P.F. (Edtr.): Proceedings of the 8th International Conference on TEchnology of Plasticity (ICTP) , Edizioni Progretto, 2005, pp. 25-54

    • Geiger, M.; Tolazzi, M.; Trägler, H.:
      System zur Erfassung der Flächenpressung bei der wirkmedienbasierten Umformung von Blechen.
      In: wt Werkstatttechnik online, 11-12, published

    • Geiger, M.; Tolazzi, M.:
      Idroformatura di lamiera per strutture complesse.
      Lamiera (2005)7, pp. 32-35

    • Tolazzi, M.; Merklein, M.:
      Precise Material Properties as a Prerequisite for FE-Analysis of the Hydroforming of Tailored Welded Blanks.
      Steel Research International 12(2005)76, pp. 901-905

    • Tolazzi, M.:
      Determination of the tensile properties for the weld line of tailored welded blanks.
      In: Banabic, D. (Edtr.): ESAFORM 2005, Proceedings of the 8th ESAFORM Conference, Trondheim, Norway, The Romanian Academy Publishing, 2005, pp. 281-284

    • Tolazzi, M.; Merklein, M.; Meiler, M.:
      Tribological Investigations on Coated Steel Sheets using the Dry Film Lubricant Drylube E1.
      In: Duflou, J.R.; Geiger, M.; Kals, H.J.J.; Shirvani, B.; Singh, U.P. (Edtrs.): Sheet Metal 2005, Proceedings of the 11th International Conference on Sheet Metal; Advanced Materials Research, Trans Tech Publications Ltd., 2005, pp. 565-572

    • Tolazzi, M.; Merklein, M.:
      Determination of Friction Coefficients for the FE Analysis of Sheet Forming of Tailored Welded Blanks.
      In: Shirvani, B.; Geiger, M.; Kals, H.J.J.; Singh, U.P.; Duflou, J. (Edtrs.): Sheet Metal 2005, Proceedings of the 11th International Conference on Sheet Metal; Advanced Materials Research, Trans Tech Publications Ltd., 2005, pp. 313-320

    2004

    • Geiger, M.; Tolazzi, M.; Lamprecht, K.:
      Innovative Kombinationen - Wirkmedienbasierte Umformung von Tailored Welded Blanks und Patchwork Blanks.
      uni.kurier.magazin der Friedrich-Alexander-Unitveristät Erlangen-Nürnberg 105(2004)30, pp. 63

    • Tolazzi, M.; Geiger, M.:
      Process parameters optimisation in sheet hydroforming .
      Innovation in Metal Forming (2004), accepted

    2003

    • Tolazzi, M.; Vahl, M.; Geiger, M.:
      Determination of friction coefficients for the finite element analysis of double sheet hydroforming with a modified dup test.
      ESAFORM (2003), pp. 479-482

    • Tolazzi, M.; Geiger, M.:
      Sheet Metal Hydroforming of Complex Components with a Ring-Shaped Geometry.
      In: Shirvani, B.; Geiger, M.; Kals, H.J.J.; Singh, U.P. (Edtrs.): Sheet Metal 2003, Proceedings of the 9th International Conference on Sheet Metal, University of Ulster, 2003, pp. 151-158

    2002

    • Tolazzi, M.; Kursawe, S.; Sockel, H.G.:
      Influence of Hot Isostatical Pressing on the Mechnical Behaviour of CVD-coated Hardmetals.
      In: (Edtr.): AMST 02: Advanced Manufacturing Systems and Technology: Proceedings of the 6th International Conference, 2002, pp. 792-800