Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Dr.-Ing. Thomas Neudecker

(former employee)

Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it




Projects


Publications

    2003

    • Popp, U.; Neudecker, T.:
      Standzeiterhöhung durch Oberflächenstrukturierung.
      In: wt Werkstatttechnik online, 93, pp. 776-779

    • Popp, U.; Neudecker, T.; Engel, U.:
      Towars Improved Tool Life in Cold Forging by Micro Texturing of Tool Surfaces.
      In: (Edtr.): Proceedings of the 4th International Conference on Industrial Tools (ICIT 2003), 2003, published

    2002

    • Popp, U.; Neudecker, T.; Engel, U.; Geiger, M.:
      Excimer Laser Texturing of Hard Coated Cold Forging Tools - Investigations on Tool Life.
      In: (Edtr.): Advanced Technology of Plasticity, Proceedings of the 7th ICTP, 2002, pp. 1633-1638

    2001

    • Neudecker, T.; Popp, U.; Engel, U.:
      Excimer laser treatment of tool surfaces and its influence on friction in metal forming processes.
      In: (Edtr.): Proceedings of the 1st International Seminar on Progress in Innovative Manufacturing Engineering (PRIME), Sestri Levante, Italien, 2001, pp. 387-392

    • Popp, U.; Neudecker, T.; Engel, U.; Geiger, M.:
      Excimer Laser Texturing of Tool Surfaces and its Influence on Friction in Cold Forging.
      In: (Edtr.): Proceedings of the 2nd International Conference THE Coatings in Manufacturing Engineering, 2001, pp. 1-8

    • Neudecker, T.; Popp, U.; Schiffer, R.; Engel, U.:
      Meßvorschrift zur Bestimmung funktionaler 3D-Oberflächenkenngrößen für die Blechumformung, Teil 2.
      UTF Science (2001)3, pp. 34-38

    • Neudecker, T.; Popp, U.; Schiffer, R.; Engel, U.:
      Meßvorschrift zur Bestimmung funktionaler 3D-Oberflächenkenngrößen für die Blechumformung, Tei 1.
      UTF Science (2001)2, pp. 12-17

    • Neudecker, T.; Popp, U.; Schiffer, R.; Engel, U.:
      Meßvorschrift zur Bestimmung funktionaler 3D-Oberflächenkenngrößen für die Blechumformung.
      Idee-Vision-Innovation (2001), pp. 391-408

    • Egerer, E.; Neudecker, T.; Engel, U.:
      Grundlagenuntersuchungen zum Halbwarmmikroumformen.
      In: KOPP (Edtr.): Tagungsband zum DFG-Kolloquium im SPP 1074 am 11.-12.09.2001, 2001, published

    2000

    • Geiger, M.; Neudecker, T.; Engel, U.:
      Micro Texturing of Ceramic Tool Surfaces and its Influence on Friction in Sheet Metal Forming Processes.
      Production Engineering - Annals of the WGP 2(2000)7, pp. 107-110

    • Neudecker, T.; Popp, U.; Engel, U.; Geiger, M.:
      Micro Texturing of Tool Surfaces and its Influence on Friction in Deep Drawing Processes.
      In: (Edtr.): Proceedings of the 8th International Conference on Sheet Metal, 2000, pp. 177-184

    • Neudecker, T.; Popp, U.; Engel, U.; Geiger, M.:
      Micro Texturing of Tool Surfaces and its Influence on Friction in Forming Processes.
      In: Dietzsch, M.; Trumpold, H. (Edtrs.): X. International Colloquium on Surfaces, Aachen: Shaker, 2000, pp. 211-221

    • Engel, U.; Neudecker, T.; Popp, U.:
      3D-Oberflächenanalyse - Methoden, Kenngrößen, Anwendungen.
      Materialwissenschaft und Werkstofftechnik 31(2000), pp. 747-753

    1999

    • Neudecker, T.; Popp, U.; Engel, U.; Geiger, M.:
      Towards optimized lubrication by micro texturing of tool surfaces.
      In: Geiger, M. (Edtr.): Advanced Technology of Plasticity 1999, Proc. of the 6th Int. Conf. on Technology of Plasticity, Vol. 1, Berlin: Springer, 1999, pp. 619-626

    • Soerensen, C.G.; Bech, J.I.; Andreasen, J-L.; Bay, N.; Engel, U.; Neudecker, T.:
      A basic study of the influence of surface topography on mechanisms of liquid lubrication in metal forming.
      Cirp Annals 48(1999)1, pp. 203-208

    1998

    • Neudecker, T.; Hinsel, C.; Engel, U.:
      Surface Texturing of Ceramics to Reduce Friction in Forming Processes.
      In: Dick, E.; De Baets, P.; Sierens, R. (Edtrs.): Proceedings of the Simposium on Computational an Experimental Methods in Mechanical and Thermal Engineering, 1998, pp. 79-83

    1997

    • Neudecker, T.; Pfestorf, M.; Engel, U.:
      Einglättung strukturierter Oberflächen.
      Tribologie und Schmierungstechnik 6(1997)44 , pp. 261-264

    1996

    • Neudecker, T.:
      Einglättung strukturierter Oberflächen unter Druckbelastung mit und ohne Schmierstoffeinsatz. .
      In: (Edtr.): 8. Deutschsprachiges ABAQUS-Anwender-Treffen., 1996, published