Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Dr.-Ing. Stephan Roth

(former employee)

Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it




Projects


Publications

    2008

    • Bich, A.; Rieck, J.; Dumouchel, C.; Roth, S.; Weible, K.J.; Eisner, M.; Völkl, R.; Zimmermann, M.; Rank, M.; Schmidt, M.; Bitterli, R.; Ramanan, N.; Ruffieux, P.; Scharf, T.; Noell, W.; Herzig, H.P.; Rooij, N.:
      Multifunctional micro-optical elements for laser beam homogenizing and beam shaping.
      In: (Edtr.): Proc SPIE, SPIE, 2008, published

    • Tangermann-Gerk, K.; Schmidt, M.; Roth, S.; Klämpfl, F.:
      Laserstrahlung als helfende Hand des Arztes.
      Laser Magazin 8(2008), pp. 4-6

    • Bechtold, P.; Roth, S.; Schmidt, M.:
      Precise Positional Adjustments with Laser-Induced Shock Waves.
      Photonics Spectra (2008), pp. 58-63

    2007

    • Zimmermann, M.; Schaefer, L.; Rank, M.; Schmidt, M.; Roth, S.:
      Fabrication of highly precise fiber optical array products by use of laser based micro alignment.
      In: Menz, W.; Dimov, S., Toshev, Y. (Edtrs.): 4M 2007, Third International Conference on Multi-Material Micro Manufacture, Whittles Publishing, 2007, pp. 111-114

    2006

    • Schmidt, M.; Roth, S.; Dirscherl, M.; Albert, F.; Mys, I.; Grimm, A.:
      Laser in der Materialbearbeitung - alter Hut oder High Tech mit Potential?.
      Technik in Bayern (2006)6, pp. 8-9

    • Rechtenwald, T.; Roth, S.; Pohle, D.:
      Funktionsprototypen aus PEEK.
      Kunststoffe 96(2006)11, pp. 62-68

    • Rechtenwald, T.; Roth, S.; Pohle, D.:
      Mittels Laserstrahljustiersintern von PEEK zu echten Funktionsprototypen.
      In: Geiger, M.; Polster, S. (Edtrs.): Tagungsband der Tagung Laser in der Elektronikproduktion & Feinwerktechnik, Meisenbach Verlag, 2006, pp. 99-111

    2005

    • Prechtl, M.; Seidel, S.; Otto, A.; Roth, S.:
      Microfluid Devices Made by Automated Metal Foil LOM.
      In: Menz, W.; Dimov, S. (Edtrs.): 4M 2005, Proceedings of the 1st International Conference on Multi-Material Micro Manufacture, Elsevier Verlag, 2005, pp. 389-392

    2004

    • Roth, S.; Dietel, C.; Eßer, G.:
      ADDIMID - Eine neue Variante zur Laserstrahlaktivierung von 3D-MIDs.
      PLUS-Produktion von Leiterplatten und Systemen 12(2004)6, pp. 2106-2110

    • Eßer, G.; Roth, S.:
      Mehr als ein Licht-Skalpell.
      abayfor - Zukunft im Brennpunkt (2004), pp. 71-74

    2001

    • Eßer, G.; Roth, S.; Krauß, H.:
      Erzeugung von Mikrostrukturen mittels Laserstrahlung.
      Idee-Vision-Innovation, Festschrift anläßlich des 60. Geburtstages von Professor Manfred Geiger (2001), pp. 143-152

    2000

    • Roth, S.; Töpperwien, A.:
      Abtragen unter Wasser - verbesserte Qualität bei der Lasermaterialbearbeitung.
      LEF 2000, Laser in der Elektronikproduktion & Feinwerktechnik (2000), pp. 85-97

    • Roth, S.; Geiger, M.:
      Specific surface treatment by laser irradiation under liquid films.
      In: Christensen, P. (Edtr.): ICALEO 2000, Proceedings of the 19th International Congress on Applications of Lasers & Electro-Optics, 2000, pp. 11 ff

    • Roth, S.; Geiger, M.:
      Novel technique for high-quality microstructuring with excimer lasers.
      Laser Applications in Microelectronic and Optoelectronic Manufacturing V (2000)3933, pp. 338-346

    1998

    • Roth, S.; Dietel, C.; Eßer, G.; Geiger, M.:
      Contact Mask Technique for Laser Structuring of 3-D MID.
      In: (Edtr.): Proceedings of the IEMT Europe Symposium, Electronics Manufacturing and Development for Automotives, IEMT, 1998, pp. 38-43

    • Geiger, M.; Roth, S.; Eßer, G.:
      Patterning of Circuitry on Tree-Dimensional Molded Interconnected Devices Using Focused Laser Radiation.
      Production Engineering 5(1998)2, pp. 35-38

    • Geiger, M.; Roth, S.; Becker, W.:
      Influence of laser-produced microstructures on the tribological behaviour of ceramics.
      Surface and Coatings Technology 100-101(1998), pp. 17-22

    • Eßer, G.; Dietel, C.; Roth, S.; Glasmacher, M.; Renner, G.; Kickelhain, J.:
      Laser assisted techniques for patterning of conductive tracks on molded interconnect devices.
      In: (Edtr.): Proceedings of the Pan Pacific Microelectronics Symposium, SMTA, 1998, pp. 225-234

    • Eßer, G.; Roth, S.:
      Laser Exposure of Photoresists and their Application in the Manufacturing of MIDs.
      In: Feldmann, K.; Pöhlau, F.; Römer, M.; Zippmann, V. (Edtrs.): 3rd International Conference on Molded Interface Devices MID 98, Meisenbach Verlag, 1998, pp. 217-226

    1997

    • Eßer, G.; Dietel, C.; Geisel, M.; Pursche, L.; Roth, S.:
      Laser Imaging of Three-Dimensional Molded Interconnect Devices..
      In: GEIGER, M.; VOLLERTSEN, F. (Edtrs.): Proc. of Laser Assisted Net Shape Engineering LANE 97 , Meisenbach, 1997, pp. 795-798