Merklein, M.; Svec, T.:
Hot Stamping – Manufacturing functional optimized components.
In: Wissenschaftliche Gesellschaft für Produktionstechnik (Edt.): Production Engineering Research and Development - Annals of the German Academic Society for Production Engineering WGP, 7(2013)2, Berlin/Heidelberg: Springer Verlag, pp. 141-151

Vatter, P.; Plettke, R.:
Process model for the design of bent 3-dimensional free-form geometries for the three-roll-push-bending process.
In: do Carmo Cunha, P. F. (Edt.): 46th CIRP Conference on Manufacturing Sys, (2013), Amsterdam: Elsevier, accepted

Vatter, P.; Hildering, S.; Tsoupis, I.; Merklein, M.:
Development of a damage prediction system for bending and cutting of high strength steels.
In: Key Engineering Materials, 554-557(2013), Zürich: Trans Tech Publications, pp. 2479-2486

Opel, S.; Schneider, T.; Merklein, M.:
Manufacturing of geared sheet metal components using flexible rolled tailored blanks.
In: De Sousa, R. A.; Valente, R. (Edt.): Key Engineering Materials , 554-557(2013), Zürich-Durnten: Trans Tech Publications, pp. 1459-1470

Andreas, K.; Noneder, J.; Engel, U.; Merklein, M.:
Application of cemented carbide based forming tools in cold forging.
In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B.; Merklein, M. (Edt.): Proc. 11th International Conference THE "A" Coatings in Manufacturing Engineering, (2013), Aachen, pp. 159-169

Schrader, T.; Weschta, M.; Engel, U.; Tremmel, S.; Merklein, M.; Wartzack, S.:
Microstructured surfaces in highly loaded EHD-contacts – manufacturing and tribological performance.
In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B.; Merklein, M. (Edt.): Proc. 10th International Conference THE "A" Coatings in Manufacturing Engineering, (2013), Aachen: Shaker Verlag, pp. 99-109

Hildering, S.; Tsoupis, I.; Merklein, M.:
Process and Damage Behaviour of High Strength Steels in Shearing Operations.
In: Buchmayr, B. (Edt.): XXXII. Verformungskundliches Kolloquium, (2013), Leoben: Lehrstuhl für Umformtechnik, Montanuniversität Leoben, pp. 89-94

Vatter, P.; Plettke, R.; Merklein, M.:
New approaches to determine the bending contour of the 3-roll-push-bending process.
In: Kaftanoglu, B. (Edt.): 7th Int. Conf. on Design and Production of Machines and Dies/Molds, (2013), Antalya, Turkey: MATIM, accepted

Vatter, P.; Plettke, R.:
Geometrical variations of tubes and their impact on freeform bending processes.
In: Advanced Materials Research, (2013), Durnten-Zurich: Trans Tech Publications, accepted

Wieland, M.; Kaupper, M.; Merklein, M.:
Umform- und Rückfederungssimulation von Leichtbauwerkstoffen - Vergleichende Betrachtung von Zug-Druck- und Wechselbiegeversuchen zur Berücksichtigung des Bauschinger-Effekts.
In: Europäische Forschungsgesellschaft für Blechverarbeitung (Edt.): Umformen, Schneiden, Verbinden im Leichtbau - Machbarkeit - Produktivität - Qualität - Tagungsband T36 des 33. EFB-Kolloquiums Blechverarbeitung am 16. und 17. April 2013 in Fellbach, (2013), pp. 347-357

Grüner, M.; Merklein, M.:
Basic experimental and numerical investigations on chip pressing.
In: Key Engineering Materials, 554-557(2013), Switzerland: Trans Tech Publications, pp. 630-637

Andreas, K.; Merklein, M.; Engel, U.:
Fatigue Behavior of Cemented Carbide Based Forming Tools.
In: Proceedings of the 18th Plansee Seminar, (2013), Reutte, in print

Svec, T.; Merklein, M.:
Hot Stamping - Process Window for the Austenitization of a Dualphase Steel.
In: Oldenburg, M.; Prakash, B.; Steinhoff, M. (Edt.): 4th International Conference Hot Sheet Metal Forming of High-Performance Steel, (2013), Auerbach: Wissenschaftliche Scripten, pp. 275-282

Buffa, Gianluca; Fratini, Livan; Gnibl, T.; Wieland, M.; Merklein, M.:
Process Mechanics in Friction Stir Welding of Magnesium Alloys: Experimental and Numerical Analysis.
In: Merklein, M.; Hagenah, H. (Edt.): Proceedings of the 15th Esaform conference, (2012), Zürich-Durnten: Trans tech Publications Ltd, pp. 735-740

Andreas, K.; Engel, U.; Merklein, M.:
Influence of Grinding on the Surface Properties of Cemented Carbides.
In: Key Engineering Materials, 504-506(2012), Durnten-Zurich: Trans Tech Publications, pp. 1353-1358

Merklein, M.; Plettke, R.; Schneider, T.; Opel, S.; Vipavc, D.:
Manufacturing of sheet metal components with variants using process adapted semi-finished products .
In: Key Engineering Materials, 504-506(2012), Schweiz: Trans Tech Publications, pp. 1023-1028

Plettke, R.; Vatter, P.; Vipavc, D.:
Basics of process design for 3d freeform-bending.
In: Kusiak, J.; Majta, J.; Szeliga, D. (Edt.): Steel research international: 14th International Conference on Metal Forming 2012, (2012), Weinheim: Wiley-VCH, pp. 307-310

Merklein, M.; Plettke, R.; Opel, S.:
Orbital forming of tailored blanks from sheet metal.
In: Annals of the CIRP, 1(2012)61, Amsterdam: Elsevier, pp. 263-266

Merklein, M.; Opel, S.; Schneider, T.; Koch, J.:
Überblick der Blechmassivumformung.
In: Umformtechnik, 1(2012)3, Bamberg: Meisenbach, pp. 42-43

Gnibl, T.:
Innovative Fertigungstechnologien für Strukturbauteile.
In: Technik in Bayern, 02 (2012), pp. 39

Gnibl, T.; Merklein, M.:
Laserunterstützes Rührreibschweißen von Magnesium Tailored Welded Blanks.
In: Buchmayr, B. (Edt.): XXXI. Verformungskundliches Kolloquium, (2012), Leoben: Lehrst. für Umformtechnik, Montanuniv. Leoben, pp. 19-22

Buffa, Gianluca; Fratini, Livan; Gnibl, T.; Wieland, M.; Merklein, M.:
On The Friction Stir Welding of Titanium Alloys: Experimental Measurements and FEM Model Fine Tuning.
In: Kusiak, J.; Majta, J.; Szeliga, D. (Edt.): Steel research international: 14th international conference Metal Forming 2012, (2012), Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA, pp. 591 - 594

Svec, T.; Merklein, M.:
Tailored tempering – FE-Simulation of manufacturing components with local adjusted mechanical properties.
In: Mori, K.; Pietrzyk, M.; Kusiak, J.; Majta, J.; Hartley, P.; Lin, J. (Edt.): Steel research international; 14th International Conference Metal Forming, (2012), Polen: Wiley-VCH Verlag GmbH & Co. KGaA, pp. 283-286

Hildering, S.; Becsi, L.; Engel, U.; Merklein, M.; Mescheder, U.:
Experimental investigations on high-precision microcutting of copper foils with microfabricated silicon punches.
In: Shore, P.; Spaan, H.; Burke, T. (Edt.): Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, 2(2012), Cranfield: euspen, pp. 177-180

Wieland, M.; Merklein, M.:
Wear Behavior of Uncoated and Coated Tools under Complex Loading Conditions.
In: Faculty of Engineering, University of Kragujevac, Serbia (Edt.): Tribology in Industry, 34(2012)1, pp. 11-17

Hildering, S.; Becsi, L.; Merklein, M.; Mescheder, U.:
Tranciatura ad alta precisione di fogli di rame mediante punzoni in silicio monocristallino rivestiti e non.
In: Lamiera, (2012)2, Mailand: Tecniche Nuove, pp. 44-48

Merklein, M.; Grüner, M.; Rösel, S.:
Enhancing Process Limits of Blank Hydroforming.
In: Institut für Umformtechnik (IFU) Universität Stuttgart (Edt.): Internationale Konferenz „Hydroumformung von Blechen, Rohren und Profilen“, (2012), Frankfurt am Main: MAT INFO Werkstoff-Informationsgesellschaft mbH, pp. 61-80

Merklein, M.; Schrader, T.; Engel, U.:
Wear behavior of PVD-Coatings.
In: Tribology in industry, 34(2012)2, Kragujevac, Serbia: Faculty of Engineering, University of Kragujevac, Serbia, pp. 51-56

Merklein, M.; Vatter, P.; Plettke, R.; Grüner, M.:
Einfluss der Fließkurve auf den Rohrbiegeradius.
In: Werkstattstechnik online, 10(2012), Düssledorf: Springer VDI Verlag, pp. 689-695

Merklein, M.; Böhm, W.; Lechner, M.:
Tailoring material properties of aluminum by local laser heat treatment.
In: Schmidt, M.; Vollertsen, F.; Geiger, M. (Edt.): Physics Procedia, 39(2012), pp. 232–239

Wieland, M.; Biasutti, M.; Kaupper, M.; Merklein, M.:
Inverse Parameteridentifikation mittels Wechselbiegeversuch zur Ermittlung der nicht isotropen Verfestigung von Blechwerkstoffen.
In: LS-DYNA Forum 2012, (2012), published

Andreas, K.; Merklein, M.; Engel, U.:
Werkzeugherstellung in der Kaltmassivumformung - Einfluss der Werkzeugoberfläche auf die tribologischen Bedingungen.
In: wt Werkstattstechnik online, 10(2012), Düsseldorf: Springer Verlag, pp. 672-677

Plettke, R.; Vipavc, D.; Grüner, M.; Hagenah, H.; Merklein, M.:
Prototype Manufacturing of Helical Needles for Suture in Deep Wound Cavities.
In: E. Ceretti, A. Fiorentino, L. Giorleo, C. Giardini (Edt.): Proc. 1st Int.Conf. Design and Processes for medical devices PROMED, (2012), Rivolti (TO): NEOS EDIZIONI srl, pp. 191-194

Wieland, M.; Merklein, M.:
Verschleißermittlung an Al/SI-beschichtetem Halbzeug in Abhängigkeit thermomechanischer Prozessparameter.
In: M. Merklein (Edt.): 7. Erlanger Workshop Warmblechumformung, (2012), Bamberg: Meisenbach, pp. 71-84

Merklein, M.; Svec, T.:
Prozessfenster zur Verarbeitung alternativer Stahlgüten im Presshärtprozess.
In: M. Merklein (Edt.): 7. Workshop Warmblechumformung, (2012), Bamberg: Meisenbach, pp. 55-70

Schrader, T.; Engel, U.; Merklein, M.:
Influences on wear load in cup extrusion processes.
In: Yoshida, Y. (Edt.): Proc. of the 7th ICFG Workshop on Process Simulation in Metalforming, (2012), Gifu, Japan, published on CD

Schrader, T.; Engel, U.; Geiger, M.; Merklein, M.:
Mehrlagenbeschichtungen für den beanspruchungsgerechten Einsatz bei Kaltmassivumformwerkzeugen.
In: Faulstich, M.; Geiger, M.; Kukla, H.; Wolf, G. (Edt.): Moderne Beschichtungen zum Verschleißschutz von Werkzeugen, (2012), Sulzbach-Rosenberg: DORNER PrintConcept, pp. 181-208

Kroiß, T.; Engel, U.:
Optimization of tool and process design for the cold forging of net-shape parts by simulation.
In: Dekena, B.; Hollmann, F. (Edt.): Process Machine Interactions, (2012), Heidelberg, New York, London: Springer, pp. 419-438

Andreas, K.; Merklein, M.; Engel, U.:
Influence of Combined Hard and Fine Machining on the Surface Properties of Cemented Carbides.
In: Tribology in industry, 34(2012)3, Kragujevac, Serbia: Faculty of Engineering, University of Kragujevac, Serbia, pp. 119-127

Hildering, S.; Engel, U.; Merklein, M.:
Use of Monocrystalline Silicon as Tool Material for Highly Accurate Blanking of Thin Metal Foils.
In: Menary, G. (Edt.): The 14th International ESAFORM Conference on Material Forming, AIP Conference Proceedings 1353, (2011), pp. 481-486

Merklein, M.; Tekkaya, A.E.; Brosius, A.; Opel, S.; Kwiatkowski, L.; Plugge, B.; Schunck, S.:
Machines and Tools for Sheet-Bulk Metal Forming.
In: Key Engineering Materials, 473(2011), Schweiz: Trans Tech Publications, pp. 91-98

Merklein, M.; Koch, J.; Opel, S.; Schneider, T.:
Fundamental investigations on the material flow at combined sheet and bulk metal forming processes.
In: Annals of the CIRP, 1(2011)60, Amsterdam: Elsevier, pp. 283-286

Rösel, S.; Merklein, M.:
Flow behaviour of magnetorheological fluids, considering the challenge of sealing in blank hydroforming in the flange area with rectangular leakage area cross-sections.
In: Key Engineering Materials, 473(2011), Switzerland: Trans Tech Publications, pp. 121-129

Schrader, T.; Merklein, M.; Engel, U.:
Application based PVD-coatings for cold forging tools.
In: Akkök, M.; Budak, E.; Firat, M.; Kaftanoglu, B. (Edt.): Proc. 6th International Conference and Exhibition on Design and Production of Machines and Dies / Molds, (2011), Ankara: MATIM, pp. 227-234

Svec, T.; Grüner, M.; Merklein, M.:
FE-Simulation of the heat transfer by defined cooling conditions during the hot stamping process.
In: Duflou, J.R.; Clarke, R.; Merklein, M.; Micari, F.; Shirvani, B.; Kellens, K. (Edt.): Key Engineering Materials, 473(2011), Switzerland: Trans Tech Publications Ltd., pp. 699-706

Tofall, M.; Merklein, M.; Plettke, R.:
Application of the Finite element methods on the staking process of staking fasteners .
In: Key Engineering Materials, (2011), Schweiz: Trans Tech Publications, pp. 273-280

Tofall, M.; Merklein, M.; Plettke, R.:
Numerical simulation of the staking process of clinching fasteners.
In: Wieland, H. (Edt.): Proceedings SCT2011, (2011), Düsseldorf: Verlag Stahleisen GmbH, pp. 646-655

Rösel, S.; Merklein, M.:
Enhancing Forming Limits by Using a Magnetorheological Fluid as Active Fluid Medium for Hydroforming.
In: Gerhard Hirt, A. Erman Tekkaya (Edt.): Steel research international: Special Edition: 10th International Conference on Technology of Plasticity, (2011), Weinheim: Wiley-VCH Verlag GmbH&Co. KGaA., pp. 453-458

Svec, T.; Merklein, M.:
Numerische Abbildung des Tailored Tempering Prozess: Wärmeübergang, FE-Simulation und Ableitung des resultierenden Gefüges.
In: Tekkaya, A. E.; Liewald, M. (Edt.): 14. Workshop - Simulation in der Umformtechnik, 14(2011)2, pp. 147-154

Merklein, M.; Schrader, T.; Engel, U.:
Wear behavior of PVD-coatings.
In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B.; Merklein, M. (Edt.): Proc. 9th International Conference THE "A" Coatings in Manufacturing Engineering, (2011), Thessaloniki, pp. 227-234

Grüner, M.; Merklein, M.:
Consideration of elastic tool deformation in numerical simulation of hydrofroming with granular material used as a medium.
In: Key Engineering Materials, 473(2011), Switzerland: Trans Tech Publications, pp. 707-714

Lämsä, J.; Mäntyjärvi, K.; Järvenpää, A.; Grüner, M.; Merklein, M.; Karjalainen, J.:
Methods for Determination of Residual Stress of a Formed Plate using Laser Ablation, Wire EDM and Milling.
In: Key Engineering Materials, 473(2011), Switzerland: Trans Tech Publications, pp. 368-375

Hildering, S.; Becsi, L.; Engel, U.; Merklein, M.; Mescheder, U.:
High-precision blanking of thin copper foils using uncoated and coated monocrystalline silicon punches.
In: Kück, H.; Reinecke, H.; Dimov, S. (Edt.): Proceedings of the 8th International Conference on Multi-Material Micro Manufacture, (2011), Research Publishing, pp. 191-195

Svec, T.; Merklein, M.:
Tailored Tempering - Heat Transfer and Resulting Properties in Dependency of Tool Temperatures.
In: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edt.): 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel, (2011), Auerbach: Wissenschaftliche Scripten, pp. 21-29

Merklein, M.; Tekkaya, A.E.; Brosius, A.; Opel, S.; Koch, J.:
Overview on sheet-bulk metal forming processes.
In: G. Hirt, A.E. Tekkaya (Edt.): Proceedings ICTP 2011, 10(2011), Aachen, pp. 1109-1114

Wieland, M.; Merklein, M.:
Waer Behavior of Uncoated and Coated Tools Under Complex Loading Conditions.
In: Merklein, M.; Bach, F.-W.; Bouzakis, K.-D.; Denkena, B.; Geiger, M.; Toenshoff, H.-K. (Edt.): Proc. 9th International Conference THE "A" Coatings in Manufacturing Engineering, (2011), pp. 27-36

Wieland, M.; Merklein, M.:
Wear Behavior of Uncoated and Coated Tools Used for Direct Hot Stamping.
In: 2nd International Conference of Engineering Against Fracture, (2011), published

Wieland, M.; Merklein, M.:
Wear Behavior of Uncoated and Coated Tools With Respect to Different Loading Conditions.
In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edt.): Proceedings of the 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel CHS², (2011), Auerbach: Verlag Wissenschaftliche Scripten, pp. 361-368

Andreas, K.; Merklein, M.; Engel, U.:
Influence of combined hard and fine machining on the surface properties of cemented carbides.
In: Bouzakis, K.-D.; Bobzin, K.; Denkena, B.; Merklein, M. (Edt.): Proc. 9th International Conference THE "A" Coatings in Manufacturing Engineering, (2011), Thessaloniki, pp. 113-122

Becsi, L.; Hildering, S.; Mescheder, U.; Engel, U.:
Mikrostanzen - Einsatz von einkristallinem Silizium als Werkzeugwerkstoff für Schneidprozesse von dünnen Folien.
In: BMBF ; VDE ; GMM ; VDI/VDE-IT (Edt.): Tagungsband 4. Mikrosystemtechnik-Kongress Darmstadt, (2011), Berlin: VDE Verlag GmbH, pp. 531-534

Schaper, M.; Lizunkova, Y.; Vucetic, M.; Hetzner, H.; Schneider, T.; Plugge, B.; Koch, J.; Opel, S.:
Sheet-bulk metal forming a new process for the production of sheet metal parts with functional components.
In: Metallurgical and Mining Industry, 3(2011)7, pp. 53-58

Grüner, M.; Merklein, M.:
Influences on the Molding in Hydroforming Using Granular Material as a Medium.
In: Chung, K.; Han, H. N.; Huh, H. Barlat, F.; Lee, M.-G. (Edt.): AIP Conference Proceedings Volume 1383 - The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), 1383(2011), American Institute of Physics, pp. 645-652

Plettke, R.; Vipavc, D.; Vatter, P.:
Influence factors of three-roll-push-bending.
In: Tekkaya, A. E. (Edt.): Proceedings of the 1st International Tube and Profile Bending Conference, (2011), pp. 131-135

Merklein, M.; Andreas, K.; Engel, U.:
Influence of machining process on residual stresses in the surface of cemented carbides.
In: Procedia Engineering, 19(2011), Amsterdam: Elsevier, pp. 252-257

Merklein, M.; Stöhr, T.; Svec, T.; Wieland, M.:
Investigations on Parameters Influencing Thermal and Frictional Properties within Hot Stamping.
In: Arbeitsgemeinschaft Wärmebehandlung und Werstofftechnik e. V. Mittemeijer, E. J.; Scholtes, B.; Altena, H. (Edt.): Journal of Heat Treatment and Materials, (2011)6, München: Carl Hanser Verlag, pp. 335-341

Svec, T.; Merklein, M.:
Finite-Element basierte Auslegung funktionsoptimierter Bauteile im Tailored Tempering Prozess.
In: Merklein, M. (Edt.): Tagungsband: 6. Erlanger Workshop Warmblechumformung, (2011), pp. 59-70

Wieland, M.; Merklein, M.:
Dickblechumformen und Formhärten - Potentiale und Grenzen bei der Herstellung hochbelasteter Funktionsbauteile.
In: M. Merklein (Edt.): 6. Erlanger Workshop Warmblechumformung, (2011), Bamberg: Meisenbach-Verlag, pp. 95 - 108

Plettke, R.; Vatter, P.; Vipavc, D.; Cojutti, M.; Hagenah, H.:
Investigation on the Process Parameters and Process Window of "Three-Roll-Push-Bending".
In: Lin Li (Edt.): Proceedings of the 36th Matador Conference, (2010), Springer Verlag, pp. 25-28

Hagenah, H.; Vipavc, D.; Vatter, P.; Cojutti, M.; Plettke, R.:
Creation of the Data Base for the Process Design of the Three-Roll-Push Bending Process.
In: Teti, R. (Edt.): 7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, (2010), in print

Rösel, S.; Merklein, M.:
Characterization of a Magnetorheological Fluid with Respect to its Suitability for Hydroforming.
In: UNIVERSITY OF BRESCIA (Edt.): International Journal of Material Forming, 3(2010), Paris: Springer, pp. 283-286

Rösel, S.; Merklein, M.:
Characterization of a magnetorheological fluid and simulative design of a magnetic field with respect to its suitability for hydroforming.
In: Warsaw University of Technology, Faculty of Production Engineering (Edt.): Proceedings of the 5th International Conference on ADVANCES IN PRODUCTION ENGINEERING, (2010), Radom: Publishing and Printing House of the Institute for Sustainable Technologies, pp. 409-417

Merklein, M.; Koch, J.; Schneider, T.; Opel, S.; Vierzigmann, H.:
Manufacturing of Complex Functional Components with Variants by Using a new Metal Forming Process – Sheet-Bulk Metal Forming.
In: University of Brescia (Edt.): International Journal of Material Forming, 3 (2010), Paris: Springer, pp. 347-350

Schrader, T.; Engel, U.; Merklein, M.:
Tribological characterization of PVD-coatings.
In: Merklein, M.; Bach, F.-W.; Bouzakis, K.-D.; Denkena, B.; Geiger, M.; Toenshoff, H.-K. (Edt.): Proc. 8th International Conference THE Coatings in Manufacturing Engineering, 438(2010), Zurich, Switzerland: Trans Tech Publications Ltd, pp. 179-186

Schrader, T.; Merklein, M.; Engel, U.:
Qualification of a new test for wear investigation on coated tools.
In: Felder, E.; Montmitonnet, P. (Edt.): Proc. 4th International Conference on Tribology in Manufacturing Processes (ICTMP), 1(2010), Paris: Transvalor - Presses des MINES, pp. 303-312

Merklein, M.; Svec, T.:
Transformation kinetics of the hot stamping steel 22MnB5 in dependency of the applied deformation on the austenitic microstructure.
In: Kolleck, R. (Edt.): Proc. 50th Conference of IDDRG 2010, (2010)50, Graz: Verlag der technischen Universität Graz, pp. 71-80

Grüner, M.; Merklein, M.:
Numerical Simulation of Hydroforming at Elevated Temperatures with Granular Material Used as Medium Compared to the Real Part Geometry.
In: Int J Mater Form, 3(2010)1, Springer-Verlag France S.A.R.L., pp. 279-282

Merklein, M.; Wieland, M.:
Characterization of Heat Transfer Coefficients of Tool Materials and Tool Coatings for Hot Stamping of Boron-Manganese Steels.
In: Merklein, M.; Bach, F.-W.; Bouzakis, K.-D.; Denkena, B.; Geiger, M.; Toenshoff, H.-K. (Edt.): Proc. 8th International Conference THE Coatings in Manufacturing Engineering, 438(2010), Zurich, Switzerland: Trans Tech Publications Ltd., pp. 81-88

Merklein, M.; Wieland, M.:
Impact of Coating Systems on the Tribological and Wear Behavior of Hot Stamping Tools.
In: Felder, E.; Montmitonnet, P. (Edt.): Proc. 4th International Conference on Tribology in Manufacturing Processes (ICTMP), 1(2010), Paris: Transvalor - Presses des MINES, pp. 261-270

Grüner, M.; Merklein, M.:
Comparison of numerical simulation and measurement of shear test and uniaxial compression test to verify material model for granular material used as medium for hydroforming.
In: Warsaw University of Technology, Faculty of Production Engineering 2010 (Edt.): Proc. 5th International Conference on Advances in Production Engineering, (2010), Radom: Publishing and Printing House of the Institute for Suitainable Technologies, pp. 418-426

Hagenah, H.; Vipavc, D.; Plettke, R.; Merklein, M.:
Numerical Model of Tube Freeform Bending by Three-Roll-Push-Bending.
In: Associacao Portuguesa de Mecanica Teória, Aplicada e Computacional (Edt.): 2nd International Conference on Engineering Optimization, (2010)01506, Lissabon, Portugal, published on CD

Merklein, M.; Svec, T.; Stöhr, T.; Wieland, M.:
Maßgeschneidert – Funktionsoptimierte Strukturbauteile im Presshärtprozess.
In: J. Winterhagen (Edt.): lightweight-design, 5(2010), Wiesbaden: Vieweg+Teuber, pp. 52-57

Hildering, S.; Engel, U.:
A novel approach for high-precision blanking of thin metal foils using monocrystalline silicon as tool material.
In: Fillon, B.; Khan-Malek, C.; Dimov, S. (Edt.): Proceedings of the 7th International Conference on Multi-Material Micro Manufacture, (2010), Research Publishing, pp. 216-219

Merklein, M.; Opel, S.; Schneider, T.:
Herstellung funktionaler Blechkomponenten.
In: wt Werkstattstechnik online, 11/12(2010), Düsseldorf: Springer, pp. 910-915

Groenbaek, J.; Engel, U.; Hinsel, C.; Kroiß, T.; Meidert, M.; Neher, R.; Räuchle, F.; Schrader, T.:
Tooling Solutions for Challenges in Cold Forging.
In: Groche, P. (Edt.): 43rd ICFG Plenary Meeting 2010, (2010), Darmstadt: Institut für Fertigungsforschung e. V., pp. 112-130

Wieland, M.; Merklein, M.:
Verschleißeigenschaften unbeschichteter und beschichteter Werkzeuge in Abhängigkeit unterschiedlicher Werkzeugbeanspruchungen .
In: Merklein, M. (Edt.): Tagungsband 5. Erlanger Workshop Warmblechumformung, (2010), Bamberg: Meisenbach, pp. 185-198

Svec, T.; Merklein, M.:
Auswirkungen spezifischer Abkühlbedingungen auf den Wärmeübergang bei Presshärtprozessen.
In: Merklein, M. (Edt.): Tagungsband: 5. Erlanger Workshop Warmblechumformung, (2010), Bamberg: Meisenbach, pp. 121-140

Merklein, M.; Opel, S.:
Investigation of Tailored Blank Production by the Process Class Sheet-Bulk Metal Forming.
In: Francisco Chinesta, Yvan Chastel, Mohamed El Mansori (Edt.): International Conference on Advances in Materials and Processing Technologies (AMPT2010), 1315(2010), Melville, USA: AIP Conference Proceedings, pp. 395-400

Schrader, T.; Engel, U.; Merklein, M.:
Tribological characterization of PVD-coatings.
In: Key Engineering Materials, 438(2010), Zurich, Switzerland: Trans Tech Publications, pp. 179-186

Merklein, M.; Koch, J.; Schneider, T.; Opel, S.; Vierzigmann, H.:
Manufacturing of Complex Functional Components with Variants by Using a new Metal Forming Process – Sheet-Bulk Metal Forming.
In: University of Brescia (Edt.): Proceedings of the 13th ESAFORM Conference, (2010), Brescia, published

Wieland, M.; Merklein, M.:
Characterization of Heat Transfer Coefficients of Tool Materials and Tool Coatings for Hot Stamping of Boron-Manganese Steels.
In: M. Merklein, F.-W. Bach, K.-D. Bouzakis, B. Denkena, M. Geiger and H.-K. Toenshoff (Edt.): Key Engineering Materials, 438(2010), Zurich, Switzerland: Trans Tech Publications, pp. 81-88

Merklein, M.; Kuppert, A.; Biasutti, M.:
Investigation of failure under shear-tension conditions with optical metrology.
In: GOM mbH (Edt.): Proc. of GOM Conference (25.05.2009), (2009), published on CD

Merklein, M.; Lechler, J.; Svec, T.:
Verformungsabhängiges Umwandlungsverhalten von presshärtbaren Bor-Mangan-Stählen.
In: Merklein, M. (Edt.): 4. Erlanger Workshop Warmblechumformung, (2009), Bamberg: Meisenbach, pp. 143 - 161

Grüner, M.; Merklein, M.:
Mechanical Behaviour of Ceramic Beads Used as Medium for Hydroforming at Elevated Temperatures.
In: Key Engineering Materials , (2009)410-411, Schweiz: Trans Tech Publications, pp. 61-68

Wieland, M.; Merklein, M.:
Beschichtungssysteme auf AlCrN-Basis für das Presshärten - thermische Kennwertermittlung für Werkzeug und Werkstoff.
In: Merklein, M.; Lechler, J. (Edt.): Tagungsband 4. Erlanger Workshop Warmblechumformung, (2009), Bamberg: Meisenbach, pp. 217-234

Merklein, M.; Wieland, M.; Staud, D.:
Friction Stir Welds Made Out of Precipitation Hardenable Aluminum Alloys - Experimental Investigations of Formability Potential.
In: Boogaard, Akkerman (Edt.): Proceedings ESAFORM 2009, (2009), Paris: Springer, pp. 323-236

Grüner, M.; Merklein, M.:
Mechanical Behaviour of Ceramic Beads Used as Medium for Hydroforming at Elevated Temperatures.
In: Shirvani, B.; Clarke, R.; Duflou, J.; Merklein, M.; Micari, F.; Griffiths, J. (Edt.): Proc. 13th Int. Conf. on Sheet Metal (SheMet 2009), (2009), Zurich, Switzerland: Trans Tech Publications, pp. 61-68

Hußnätter, W.; Grüner, M.; Merklein, M.:
Material Characterization of Sheet Metal at Elevated Temperatures Using Optical Technologies.
In: AMA Service GmbH (Edt.): OPTO 2008 - 8. Internationaler Kongress für Optische Technologien, (2008), pp. 87-92