Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Dr.-Ing. Thomas Kroiß

(former employee)

Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it


Projects


Research Groups


Publications

    2012

    • Kroiß, T.; Engel, U.:
      Optimization of tool and process design for the cold forging of net-shape parts by simulation.
      Process Machine Interactions (2012), pp. 419-438

    2011

    • Engel, U.; Groenbaek, J.; Hinsel, C.; Kroiß, T.; Meidert, M.; Neher, R.; Räuchle, F.; Schrader, T.:
      Tooling Solutions for Challenges in Cold Forging.
      UTFScience (2011)3, pp. 1-24

    • Kroiß, T.:
      Process Modeling in Cold Forging Considering Process Machine Interactions and Scatter of Influencing Factors.
      In: Hora, P. (Edtr.): Proc. 4th Form. Technol. Forum, Institute of Virtual Manufacturing, ETH Zurich, ISBN: 978-3-909386-48-2, 2011, pp. 129-134

    2010

    • Groenbaek, J.; Engel, U.; Hinsel, C.; Kroiß, T.; Meidert, M.; Neher, R.; Räuchle, F.; Schrader, T.:
      Tooling Solutions for Challenges in Cold Forging.
      In: Groche, P. (Edtr.): 43rd ICFG Plenary Meeting 2010, Institut für Fertigungsforschung e. V., 2010, pp. 112-130

    • Kroiß, T.; Engel, U.; Merklein, M.:
      Simulation-Based Determination of Deflection Characteristic of Tooling System and its Modeling in FE Simulation of Cold Forging Process.
      In: K. Mori et al. (Edtr.): steel research international (special edition Metal Forming 2010), Wiley-VCH Verlag GmbH & Co. KGaA, 2010, pp. 318-321

    • Kroiß, T.; Engel, U.; Merklein, M.:
      Modeling of the Behavior of a Cold Forging Process Considering the Deflection of Tooling System and Press.
      In: (Edtr.): Proc. 2nd Int. Conf. on Process Machine Interactions (PMI), ISBN: 978-0-9866331-0-2, 2010, published on CD

    • Kroiß, T.; Engel, U.; Merklein, M.:
      Process Modeling In Cold Forging Considering The Process-Tool-Machine Interactions.
      In: Barlat, F.; Moon, Y. H.; Lee, M.-G. (Edtrs.): Proc. of the 10th Int. Conf. on Numerical Methods in Industrial Forming Processes; AIP Conference Proceedings 1252, American Institute of Physics, 2010, pp. 312-319

    2009

    • Kroiß, T.; Engel, U.:
      FE-Based Modeling of Interactions Between Cold Forging Process, Tooling System and Force Controlled Press.
      In: Gantar, G. (Edtr.): ICIT&MPT 2009, Proc. of the 7th Int. Conf. on Industrial Tools and Material Processing Technologies, Oktober 4-7, Ljubljana, Slovenia, TECOS, 2009, pp. 293-300

    2008

    • Kroiß, T.; Engel, U.; Völkl, R.; Geiger, M.:
      Process-machine interactions in cold forging – calculation of press / tooling stiffness and its integration into FE process simulation.
      In: Yang, D.Y. (Edtr.): Proc. of the 9th International Conference on Technology of Plasticity (ICTP), 2008, pp. 1735-40

    • Kroiß, T.; Völkl, R.; Engel, U.; Geiger, M.:
      Modeling of Process-Tool-Machine Interactions in Cold Forging.
      In: Denkena, B. (Edtr.): Proc. 1st Int. Conf. on Process Machine Interactions (PMI), PZH, 2008, pp. 175-182

    2007

    • Kroiß, T.; Völkl, R.; Engel, U.:
      Berechnung der Wechselwirkungen zwischen Umformmaschine und -prozess auf Basis der Integration eines Pressenmodells in die FE-Fließpresssimulation.
      In: DWM (Edtr.): Proc.12th Dresdner Werkzeugmaschinen-Fachseminar, 2007, published