Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Dr.-Ing. Norbert Lutz

(former employee)

Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it




Publications

    1996

    • Geiger, M.; Becker, W.; Rebhan, T.; Hutfless, J.; Lutz, N.:
      Increase of Efficiency for the XeCl excimer laser ablation of ceramics. In: .
      Applied Surface Science (1996)96 - 98, pp. 309-315

    1995

    • Geiger, M.; Lutz, N.:
      Lasertechnologie für die Fabrik 2000 .
      In: Geiger, M. (Edtr.): Schlüsseltechnologie Laser: Herausforderungen an die Fabrik 2000, , Bamberg: Meisenbach, pp. 3-12

    • Geiger, M.; Becker, W.; Rebhan, T.; Hutfless, J.; Lutz, N.:
      Increase of Efficiency for the XeCl Excimer Laser Ablation of Ceramics.
      In: (Edtr.): Proc. of the E-MRS Spring Meeting, Session COLA, 1995, published

    1994

    • Hutfless, J.; Rebhan, T.; Lutz, N.; Geiger, M.; Frank, M. ; Streibl, N.; Schwinder, J.:
      Mikrooptiken für die effiziente Materialbearbeitung mit Excimerlasern..
      Laser & Optoelektronik 26 (1994)4, pp. 50-57

    • Geiger, M.; Lutz, N.:
      Precision Machining of Ceramics with XeCl Excimer Laser Radiation.
      In: (Edtr.): Production Engineering - Annals of the WGP, 1994, pp. 73-78

    1993

    • Lutz, N.; Geiger, M.:
      Veränderung der Oberflächenfeingestalt keramischer Bauteile durch XeCl-Excimerlaserstrahlung.
      In: Westkämper, E. (Edtr.): Jahrbuch Schleifen, Honen, Läppen und Polieren, , Essen: Vulkan Verlag, pp. 497-505

    • Goller, M.; Lutz, N.; Geiger, M.:
      Micromachining of Ceramics with Excimer Laser Radiation.
      Journal of the European Ceramic Society 12(1993), pp. 315-321

    • Geiger, M.; Rebhan, T.; Lutz, N.; Hutfless, J.:
      Processing of Compounds and Silica-Layers with an Excimer-Laser-Processing Centre.
      In: (Edtr.): Proceedings of the EUREKA 205 International Workshop Excimer Laser Applications, 1993, published

    • Geiger, M.; Lutz, N.; Rebhan, T.; Hutfless, J.:
      Quality Control during Excimer Laser Material Processing.
      Proceedings of Gas Flow and Chemical Lasers (1993), pp. 620-623

    • Geiger, M.; Lutz, N.; Goller, M.:
      Excimer Laser Radiation - A Promising Tool for Microstructuring Ceramics.
      Lasers in Engineering (1993)2, pp. 21-31

    1992

    • Geiger, M.; Lutz, N.; Rebhan, T.; Hutfless, J.:
      Quality Control during Excimer Laser Materials Processing.
      In: (Edtr.): Proc. of GCL 92, 9th Int. Symp. on Gas Flow and Chemical Lasers, Heraklion, Kreta , 1992, published

    • Geiger, M.; Lutz, N.; Rebhan, T.; Goller, M.:
      Influence of Process and Material Parameters on Ablation Phenomena and Mechanical Properties of Ceramics and Composites for Excimer Laser Treatment.
      In: MORDIKE, B.L. (Edtr.): Laser Treatment of Materials, Oberursel : DGM Informationsgesellschaft, 1992, pp. 577- 584

    1990

    • Lutz, N.; Geiger, M.:
      Proceedings of ceramics with excimer lasers.
      In: Bergmann, H.-W.; Kupfer, R. (Edtrs.): Proceedings of the 3rd European Conference on Laser Treatment of Materials (ECLAT), Erlangen, Sprechsaal Publ. Group, 1990, pp. 849-857

    1989

    • Biermann, S.; Hutfless, J.; Lutz, N.; Nuss, R.; Geiger, M.:
      Vergleichende Untersuchungen zur Laserstrahlüberwachung an einem CO2-Hochleistungslaser.
      Laser/Optoelektronik in der Technik (1989), published