(former employee)
Mail address:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Coremans, A.; Dierken, R.; Hoffmann, P.:
From Research to Practical Applications - Rapid Prototyping at the BLZ.
In: Campbell, R. I. (Edtr.): Proceedings of the 7th European Conference on Rapid Prototyping and Manufacturing, Aachen, Birch Print, 1998, published
Coremans, A.; Dierken, R.; Hoffmann, P.:
From Research to Practical Applications - Rapid Prototyping in the Future.
In: (Edtr.): Proceedings of the ICALEO Europe 98, LIA, 1998, published
Coremans, A.; Dierken, R.; Hoffmann, P.:
Aus der Forschung in die Anwendung - RP-Technologien in der Zukunft.
In: Hornig, C. (Edtr.): Tagungsband Forum für innovative Produktentwicklung, CLAHO Engineering GmbH, 1998, published
Geiger, M.; Coremans, A.:
Laser-supported rapid tooling - Tools for the manufacture of functional Components with Net Shape Properties..
In: Kuzman, K.; Bali, J. (Edtrs.): Proceedings of the International Conference on Industrial Tools. Maribor, Slowenien, 21. - 22.04.1997 , 1997, pp. 5-19
Coremans, A.; Neubauer, N.; Hoffmann, P.; Neugebauer, S.:
Laserstrahlsintern von Metallpulvern. .
Lasermarkt (1997)3, pp. 28-33
Coremans, A.; Hoffmann, P.; Leibelt, R.:
Direktes Metall-Laserstrahlsintern und Laserstrahlabtragen - Zwei Verfahren zum Rapid Tooling. .
In: Milberg, J.; Reinhart, G. (Edtr.): Rapid Tooling. Mit neuen Technologien schnell vom Entwurf zum Serienprodukt. , , Augsburg, pp. 97-112
Coremans, A.:
Optimierung der System- und Prozeßtechnik beim Laserstrahlsintern von Metallpulvern zur direkten Herstellung metallischer Prototypen..
In: (Edtr.): Berichtsband zum Abschlußkolloquium "Präzisionslaserstrahlfertigungstechnik für den Maschinenbau" , 1997, pp. 223-246
Coremans, A.:
Optimierung der System- und Prozeßtechnik beim Laserstrahlsintern von Metallpulvern zur direkten Herstellung metallischer Prototypen..
: , 1997
Coremans, A.; Groot, D.:
Residual stresses and thermal stability of laser beam sintered metal parts. .
In: GEIGER, M.; VOLLERTSEN, F. (Edtrs.): Proc. of Laser Assisted Net Shape Engineering LANE 1997 (1997), Meisenbach, 1997, pp. 577-588
Geiger, M.; Coremans, A.; Neubauer, N.; Niebling, F.:
Advanced rapid prototyping by Laser beam sintering of metal prototypes: design and development of an optimized laser Beam delivery system..
In: AHLERS, R.-J., REINHART, G. (Edtr.): Proc. Of the Europto Series - Rapid Prototyping (1996), Frankreich : Besancon, 1996, pp. 103-114
Geiger, M.; Coremans, A.:
Metal Forming at the 45th CIRP General Assembly..
Wire (1996)46, pp. 43-44
Geiger, M.; Coremans, A.:
Umformtechnik auf der 45. CIRP-Generalversammlung.
In: (Edtr.): Draht, 1995, pp. 522-523
Geiger, M.; Coremans, A.:
Umformtechnik auf der 45. CIRP-Generalversammlung.
Blech Rohre Profile 10(1995)42, pp. 641-642
Geiger, M.; Coremans, A.:
Umformtechnik auf der 44. CIRP-Generalversammlung..
Blech Rohre Profile 1(1995)42, pp. 62-63
Geiger, M.; Coremans, A.:
Moderne Blechumformung - Offen für neue fachübergreifende Denkansätze.
Blech Rohre Profile 5(1995)42, pp. 329-334
Geiger, M.; Coremans, A.:
Metal Forming Technology at the 44th CIRP General Assembly.
Wire 2(1995)45, pp. 116-117
Geiger, M.; Arnet, H.; Vollertsen, F.; Coremans, A.:
Laseromvormen (niederländisch).
MB Produktietechniek 1(1995)61, pp. 333-338
Coremans, A.; Hoffmann, P.; Geiger, M.:
Direct Metallic Prototypes using Laser Beam Sintering and Laser Caving Technologies. .
In: Geiger, M. & andere (Edtr.): : Proceedings of the 3rd International Workshop on Rapid Prototyping in Medicine & Computer-Assisted Surgery, Meisenbach, 1995, pp. 18ff
Coremans, A.; Geiger, M.:
Lasertechniek in synergie met omvormtechnik (niederländisch).
MB Produktietechniek 8-9(1995)61, pp. 270-277
Geiger, M.; Coremans, A.:
Umformtechnik auf der 43. CIRP-Generalversammlung.
Blech, Rohre, Profile 41(1994)4, pp. 261-262
Geiger, M.; Coremans, A.:
Stand und Entwicklungstendenzen bei der Laseranwendung in der Blechbearbeitung.
In: (Edtr.): Blechbearbeitung, VDI Berichte, 1994, pp. 265-290