Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Dr.-Ing. Martin Müller

(former employee)

Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

ICFG Secretary's Office Erlangen
E-Mail: icfg@lft.uni-erlangen.de
Web: http://www.icfg.info

Project manager DFG Priority program 1640



Projects


Research Groups


Publications

    2019

    • Graser, M.; Wiesenmayer, S.; Müller, M.; Merklein, M.:
      Application of Tailor Heat Treated Blanks Technology in a Joining by Forming Process.
      Journal of Material Processing Technology 264(2019), pp. 259-272

    2018

    • Wiesenmayer, S.; Müller, M.; Dornberger, P.; Han, D.; Hörhold, R.; Meschut, G.; Merklein, M.:
      Numerical Investigation of the Tool Load in Joining by Forming of Dissimilar Materials Using Shear-Clinching Technology.
      Key Engineering Materials 767(2018), pp. 397-404

    • Han, D.; Hörhold, R.; Müller, M.; Wiesenmayer, S.; Merklein, M.; Meschut, G.:
      Shear-Clinching of Multi-Element Specimens of Aluminium Alloy and Ultra-High-Strength Steel.
      Key Engineering Materials 767(2018), pp. 389-396

    2017

    • Hörhold, R.; Müller, M.; Merklein, M.; Meschut, G.:
      Specimen´s Geometry Related Influences on Load-Bearing Capacity of Joining Aluminium and UHSS by Innovative Shear-Clinching.
      Journal of Materials Science Research 6(2017)4, published online

    2016

    • Hörhold, R.; Müller, M.; Merklein, M.; Meschut, G.:
      Mechanical properties of an innovative shear-clinching technology for ultra-high-strength steel and aluminium in lightweight car body structures.
      Welding in the World 60(2016)3, pp. 613-620

    • Hörhold, R.; Müller, M.; Merklein, M.; Meschut, G.:
      Fundamental Studies on a Novel Die Concept for Round-Point Shear-Clinching.
      AIP Conference Proceedings 1769(2016)100003, pp. 1-6

    • Müller, M.; Hörhold, R.; Meschut, G.; Merklein, M.:
      Numerische Untersuchung des Werkstoffflusses beim Fügen artungleicher Werkstoffe mittels Schneidclinchen.
      In: Brosius, A. (Edtr.): Tagungsband SFU 2016, 2016, pp. 158-165

    2015

    • Müller, M.; Hörhold, R.; Meschut, G.; Merklein, M.:
      FE-based study of the cutting operation within joining by forming of dissimilar materials using shear-clinching technology.
      Adv. Mater. Res. 794(2015), pp. 304-311

    • Müller, M.; Vierzigmann, U.; Hörhold, R.; Meschut, G.; Merklein, M.:
      Development of a testing method for the identification of friction coefficients for numerical modeling of the shear-clinching process.
      Key Eng. Mater. 639(2015), pp. 469-476

    2014

    • Merklein, M.; Meschut, G.; Müller, M.; Hörhold, R.:
      Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology.
      Key Eng. Mater. 611-612(2014), pp. 1413-1420

    • Müller, M.; Hörhold, R.; Merklein, M.; Meschut, G.:
      Analysis of material behaviour in experimental and simulative setup of joining by forming of aluminium alloy and high strength steel with shear-clinching technology.
      Adv. Mater. Res. 966-967(2014), pp. 549-556

    • Merklein, M.; Andreas, K.; Gröbel, D.; Hildenbrand, P.; Müller, M.; Noneder, J.; Zimmermann, A.; Schneider, T.; Vierzigmann, U.:
      Potenziale und Grenzen der Simulation in der Fertigungstechnik.
      In: simufact engineering GmbH (Edtr.): Tagungsband 15. RoundTable - Simulating Manufacturing, ISBN: 978-3-9813814-3-6, 2014, pp. 1-38

    • Müller, M.; Vierzigmann, U.; Hörhold, R.; Meschut, G.; Merklein, M.:
      Adaption des Ringstauchversuchs für die Untersuchung der tribologischen Bedingungen beim Fügen warmumgeformter Stähle mittels Schneidclinchen.
      In: M. Merklein (Edtr.): 9. Erlanger Workshop Warmblechumformung, Meisenbach, 2014, pp. 163-174

    2013

    • Merklein, M.; Meschut, G.; Müller, M.; Hörhold, R.:
      Grundlegende Untersuchungen zur Verbindung von pressgehärtetem Stahl und Aluminium mittels Schneidclinchen.
      In: A. Brosius (Edtr.): Tagungsband - 20. Sächsiche Fachtagung Umformtechnik, 2013, pp. 63-72