Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Dipl.-Ing. Adam Schaub

(former employee)

Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it


Projects


Publications

    2016

    • Schaub, A.; Degner, J.; Ahuja, B.; Schmidt, M.; Merklein, M.:
      Numerical Investigation for Superplastic Forming Tool Development Within the Combined Process Chain of Forming and Additive Manufacturing.
      In: Dimitrov, D; Oosthuizen, T. (Edtrs.): Int. Conf. Competitive Manufacturing, 2016, pp. 173-179

    • Merklein, M.; Junker, D.; Schaub, A.; Neubauer, F.:
      Hybrid Additive Manufacturing Technologies - An Analysis regarding Potentials and Applications.
      Procedia Engineering 83(2016), pp. 549 - 559

    • Merklein, M.; Dubjella, P.; Schaub, A.; Butzhammer, L.; Schmidt, M.:
      Interaction of Additive Manufacturing and Forming.
      In: (Edtr.): 6th International Conference on Additive Technologies - iCAT, 2016, pp. 309-316

    2015

    • Hagenah, H.; Merklein, M.; Lechner, M.; Schaub, A.; Lutz, S.:
      Determination of the mechanical properties of hot stamped parts from numerical simulations.
      Procedia CIRP 33(2015), pp. 167-172

    • Merklein, M.; Plettke, R.; Junker, D.; Schaub, A.; Ahuja, B.:
      Mechanical Testing of Additive Manufactured Metal Parts.
      Key Eng. Mater. 651-653 (2015), pp. 713-718

    • Bhrigu, A.; Schaub, A.; Karg, M.; Schmidt, R.; Merklein, M.; Schmidt, M.:
      High Power Laser Beam Melting of Ti6Al4V on Formed Sheet Metal to achieve Hybrid structures.
      In: Helvajian, H., Piqué, A., Wegener, M.; Gu, B. (Edtrs.): Proc. of SPIE , 2015, pp. 1-10

    • Karg, M.; Ahuja, B.; Schaub, A.; Schmidt, J.; Sachs, M.; Mahr, A.; Wiesenmayer, S.; Wigner, L.; Wirth, K.-E.; Peukert, W.; Merklein, M.; Schmidt, M.:
      Effect of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2618 additively manufactured by Laser Beam Melting in powder bed.
      In: WLT e. V. (Edtr.): Lasers in Manufacturing Conference, 2015, published

    • Merklein, M.; Junker, D.; Schaub, A.; Kretschmer, A.; Lechner, M.:
      Development of a New Method for Producing Plane Expanded Metal by Laser Cutting and Forming of Metal Plates under Uniaxial Tension.
      Key Engineering Materials 639(2015), pp. 131-136

    • Merklein, M.; Junker, D.; Schaub, A.; Kretschmer, A.; Lechner, M.:
      Development of a New Method for Producing Plane Expanded Metal by Laser Cutting and Forming of Metal Plates under Uniaxial Tension.
      Key Engineering Materials 639(2015), pp. 131-136

    2014

    • Plettke, R.; Schaub, A.; Gröschel, C.; Scheitler, C.; Vetter, M.; Hentschel, O.; Ranft, F.; Merklein, M.; Schmidt, M.; Drummer, D.:
      A new process chain for joining sheet metal to fibre composite sheets.
      Key Eng. Mater. 611-612 (2014), pp. 1468-1475

    • Schaub, A.; Ahuja, B.; Karg, M.; Schmidt, M.; Merklein, M.:
      Fabrication and Characterization of Laser Beam Melted Ti-6Al-4V Geometries on Sheet Metal.
      In: Demmer, A.; Fraunhofer IPT (Edtrs.): Proc. Fraunhofer Direct Digital Manufacturing Conference - DDMC 2014, Fraunhofer, 2014, pp. 1-5

    • Schaub, A.; Juechter, V.; Singer, R. F.; Merklein, M.:
      Characterization of hybrid components consisting of SEBM additive structures and sheet metal of alloy Ti-6Al-4V.
      Key Eng. Mater. 611-612 (2014), pp. 109-116

    • Merklein, M.; Suttner, S.; Schaub, A.:
      Experimental investigation of Ti-6Al-4V with a biaxial tensile test setup at elevated temperature.
      Key Eng. Mater. 622-623 (2014), pp. 273-278

    • Ahuja, B.; Schaub, A.; Karg, M.; Lechner, M.; Merklein, M.; Schmidt, M.:
      Developing LBM process parameters for Ti-6Al-4V thin wall structures and determining the corresponding mechanical characteristics.
      Physics Procedia 56 (2014), pp. 90-98

    • Juechter, V.; Schaub, A.; Merklein, M.; Singer, R. F.:
      Titanium metal sheet structures of various wall thicknesses with additional functional elements prepared by selective electron beam melting in a powder bed.
      In: Drstvensek, I. (Edtr.): Proc. 5th International Conference on Additive Technologies - iCAT2014, Interesansa - zavod, 2014, pp. 119-122

    • Ahuja, B.; Schaub, A.; Junker, D.; Karg, M.; Tenner, F.; Plettke, R.; Merklein, M.; Schmidt, M.:
      A round robin study for Laser Beam Melting in Metal Powder Bed: Comparing mechanical characteristics with system technology variation.
      In: (Edtr.): Proc. 15th Annual Conference of RAPDASA 2014, 2014, accepted

    2013

    • Schaub, A.; Merklein, M.; Juechter, V.; Singer, R. F.; Koerner, C.:
      Funktionsintegration durch die Kombination additiver Fertigungsprozesse mit der Blechumformung.
      In: Drummer, D. (Edtr.): 2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung, Print Line, 2013, pp. 87-101

    • Merklein, M.; Hagenah, H.; Kaupper, M.; Schaub, A.:
      Mechanical response of Ti-6Al-4V alloy on deformation at moderate temperatures.
      Key Eng. Mater. 549 (2013), pp. 311-316

    • Merklein, M.; Hagenah, H.; Kaupper, M.; Schaub, A.:
      Analysis of the deformation behavior of Ti-6Al-4V at elevated temperatures.
      Key Eng. Mater. 554-557 (2013), pp. 29-32

    • Schaub, A.; Lechner, M.; Merklein, M.:
      Druckversuch bei erhöhten Temperaturen.
      In: H.J. Christ (Edtr.): Tagungsband Werkstoffprüfung DGM, Stahleisen, 2013, pp. 85-90