Lehrstuhl für Fertigungstechnologie, Universität Erlangen-Nürnberg



Dr.-Ing. Sebastian Suttner

(former employee)

Mail address: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Former team leader Material characterisation and modelling



Projects


Research Groups


Publications

    2017

    • Suttner, S.; Merklein, M.:
      A new approach for the determination of the linear elastic modulus from uniaxial tensile tests of sheet metals.
      Journal of Materials Processing Technology 241(2017), pp. 64-72

    • Herrmann, J.; Suttner, S.; Merklein, M.:
      Experimental investigation and numerical modeling of the bond shear strength of multi-layered 6000 series aluminum alloys.
      Procedia Engineering 183(2017)C, pp. 283-290

    • Schmid, H.; Suttner, S.; Merklein, M.:
      An incremental analysis of a deep drawing steel’s material behaviour undergoing the predeformation using drawbeads.
      In: 36th IDDRG Conference – Materials Modelling and Testing for Sheet Metal Forming (Edtrs.): IOP Conf. Series: Journal of Physics: Conf. Series 896 (2017) 011001 , https://doi.org/10.1088/1742-6596/896/1/011001, 2017, published

    • Lenzen, M.; Suttner, S.; Merklein, M.:
      Characterisation of strain rate dependency of sheet metals under biaxial loading with a strain rate controlled hydraulic bulge test.
      In: R. H. Schmitt, G. Schuh (Edtr.): 7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017, Apprimus, 2017, pp. 535-540

    • Schmid, H.; Suttner, S.; Merklein, M.:
      Investigation of process induced changes of material behaviour using a drawbead in forming operations.
      In: R. H. Schmitt, G. Schuh (Edtr.): 7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017, Apprimus, 2017, pp. 37-42

    2016

    • Degner, J.; Suttner, S.; Merklein, M.:
      Investigation of the Unloading Yield Effect in Aluminum and Magnesium Sheet Metal Alloys at Room Temperature.
      Key Eng. Mater. 716(2016), pp. 331-336

    • Suttner, S.; Merklein, M.:
      Experimental and numerical investigation of a strain rate controlled hydraulic bulge test of sheet metal.
      Journal of Materials Processing Technology 235(2016), pp. 121-133

    • Suttner, S.; Merklein, M.:
      Cyclic tension test of AZ31 magnesium alloy at elevated temperature realized in a miniaturized uniaxial tensile test setup.
      Materials Science Forum 854(2016), pp. 112-117

    • Suttner, S.; Merklein, M.:
      Influence of specimen size and sheet thickness on the material behavior of AZ31B under uniaxial tension.
      In: ASMET (Edtr.): Proc. Int. Deep Drawing Research Group Conf. 2016 (IDDRG 2016), , ASMET, 2016, pp. 546-553

    • Suttner, S.; Merklein, M.:
      Magnesium - Leichtbauwerkstoff der Blechumformung: Relevanz einer exakten Werkstoffcharakterisierung und -modellierung.
      Zeitschrift Konstruktion 9(2016), pp. IW8-IW10

    • Lenzen, M.; Suttner, S.; Merklein, M.:
      Einfluss der Auflösung des Dehnungsfeldes auf die Kennwertermittlung im Scherzugversuch von Aluminium- und Magnesiumlegierungen.
      In: H.-J. Christ (Edtr.): Tagung Werkstoffprüfung 2016, Stahleisen, 2016, pp. 143-148

    • Suttner, S.; Merklein, M.:
      Influence of specimen size and sheet thickness on the material behavior of AZ31B under uniaxial tension.
      IOP Conf. Series: Materials Science and Engineering 159(2016), pp. 1-8

    2015

    • Rosenschon, M.; Suttner, S.; Merklein, M.:
      Validation of kinematic hardening parameters from different stress states and levels of plastic strain with the use of the cyclic bending test.
      Key Eng. Mater. 639(2015), pp. 385-392

    • Suttner, S.; Merklein, M.:
      Influence of stress relaxation after uniaxial pre-straining on subsequent plastic yielding in the uniaxial tensile test of sheet metal.
      Key Eng. Mater. 639(2015), pp. 377-384

    • Suttner, S.; Merklein, M.:
      Characterization of the shear stress state under non-proportional strain paths realized by biaxial stretching in the Marciniak Test.
      Materials Today: Proceedings 2S(2015), pp. S98-S106

    • Suttner, S.; Merklein, M.:
      Charakterisierung des Verfestigungsverhaltens der Magnesiumlegierung AZ31 im Scherspannungszustand bei erhöhter Temperatur.
      In: Stahlinstitut VDEh (Edtr.): Tagung Werkstoffprüfung 2015, 2015, pp. 101-106

    • Rosenschon, M.; Suttner, S.; Merklein, M.:
      Evaluation of kinematic hardening models for multiple stress reversals under continuous cyclic shearing and multi - step bending.
      In: (Edtr.): LS-DYNA Forum 2015, published online, 2015, published online

    • Degner, J.; Suttner, S.; Tsoupis, I.; Lechner, M.; Merklein, M.:
      Manufacturing of Innovative Aluminum Components by Combining Shear Cutting Operation and Tailor Heat Treated Blank Technique.
      In: Landgrebe, D.; Drossel, W.-G.; Putz, M. (Edtrs.): 5th International Conference on Accuracy in Forming Technology, Verlag Wissenschaftliche Scripten, 2015, pp. 193-208

    2014

    • Yin, Q.; Zillmann, B.; Suttner, S.; Gerstein, G.; Biasutti, M.; Tekkaya, A. E.; Wagner, M. F.-X.; Merklein, M.; Schaper, M.; Halle, T.:
      An experimental and numerical investigation of different shear test configurations for sheet metal characterization.
      Int. J. Solids Struct. 51(2014)5, pp. 1066-1074

    • Merklein, M.; Suttner, S.; Schaub, A.:
      Experimental investigation of Ti-6Al-4V with a biaxial tensile test setup at elevated temperature.
      Key Eng. Mater. 622-623 (2014), pp. 273-278

    • Suttner, S.; Merklein, M.:
      Characterization of the Bauschinger effect and identification of the kinematic Chaboche model by tension-compression tests and cyclic shear tests.
      In: Sfar, H.; Maillard, A. (Edtrs.): Proc. International Deep Drawing Research Group Conf. IDDRG 2014, France, 2014, pp. 125-130

    • Merklein, M.; Suttner, S.; Brosius, A.:
      Characterisation of kinematic hardening and yield surface evolution from uniaxial to biaxial tension with continuous strain path change.
      CIRP Annals - Manufacturing Technology 63(2014)1, pp. 297-300

    • Suttner, S.; Rosenschon, M.; Merklein, M.:
      Methodik zur Parameteridentifikation des kinematischen Verfestigungsmodells nach Chaboche und Rousselier.
      In: W. Grellmann, H. Frenz (Edtr.): Tagungsband Werkstoffprüfung, DVM e.V., 2014, pp. 205-210

    2013

    • Merklein, M.; Suttner, S.:
      Evolution of yield loci for aluminum alloy AA6016 and deep drawing steel DC06 under the influence of non-linear strain paths.
      Key Eng. Mater. 549(2013), pp. 21-28

    • Suttner, S.; Kuppert, A.:
      Investigation of the beginning of plastic yielding and the hardening behaviour under biaxial tension.
      Adv. Mater. Res. 769(2013), pp. 197-204

    • Suttner, S.; Merklein, M.:
      Experimentelle Untersuchung des zweiachsigen Spannungszustands im Kreuzzugversuch zur Identifikation von Werkstoffmodellen für die Finite-Elemente Simulation.
      In: H.-J. Christ (Edtr.): Tagungsband Werkstoffprüfung, Stahleisen, 2013, pp. 59-64

    • Merklein, M.; Suttner, S.:
      Werkstoffcharakterisierung mit Blick auf die Vergangenheit, die Gegenwart und die Zukunft.
      In: A. Brosius (Edtr.): Tagungsband - 20. Sächsiche Fachtagung Umformtechnik, 2013, pp. 1-12

    • Gnibl, T.; Suttner, S.; Merklein, M.:
      Mechanical Weld Zone Characterization for the Numerical Simulation of Forming Friction Stir Welded Aluminum Blanks.
      AIP Conf. Proc. 1567(2013)1, pp. 684-687

    2012

    • Merklein, M.; Suttner, S.; Hofmann, M.; Kuppert, A.:
      Über die Blechprüfung von heute.
      In: M. Borsutzki, G. Moninger (Edtr.): Tagungsband Werkstoffprüfung, Stahleisen, 2012, pp. 1-6