Henneberg, J.; Beyer, F.; Löffler, M.; Willner, K.; Merklein, M.:
Constitutive Friction Law for the Description and Optimization of Tailored Surfaces.
In: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Edtrs.): Sheet Bulk Metal Forming, Zug: Springer Nature, 2021, accepted

Hetzel, A.; Lechner, M.:
Orbital Forming of Tailored Blanks for Industrial Application.
In: Merklein, M.; Tekkaya, A. E.; Behrens, B.-A. (Edtrs.): Sheet Bulk Metal Forming - Lecture Notes in Production Engineering, Cham: Springer Nature, 2021, pp. 458-476

Schirdewahn, S.; Spranger, F.; Hilgenberg, K.; Merklein, M.:
Tribological and thermal behavior of laser implanted tool surfaces for hot stamping AlSi coated 22MnB5 sheets.
In: (Edtr.): 9th International Conference on Tribology in Manufacturing Processes ＆ Joining by Plastic Deformation, 2021, accepted

Schirdewahn, S.; Spranger, F.; Hilgenberg, K.; Merklein, M.:
Investigation of the thermal and tribological performance of localized laser dispersed tool surfaces under hot stamping conditions.
WEAR (2021), accepted

Horn, A.; Merklein, M.:
Functional optimization of hot-stamped components by local carburization.
International Journal of Lightweight Materials and Manufacture 3(2020)1, pp. 43-54

Spranger, F.; Schirdewahn, S.; Kromm, A.; Merklein, M.; Hilgenberg, K.:
On the influence of TiB2, TiC and TiN hard particles on the microstructure of localized laser dispersed AISI D2 tool steel surfaces.
Journal of Laser Applications 32(2020)2, published

Spranger, F.; de Oliveira Lopes, M.; Schirdewahn, S.; Degner, J.; Merklein, M.; Hilgenberg, K.:
Microstructural evolution and geometrical properties of TiB2 metal matrix composite protrusions on hot work tool steel surfaces manufactured by laser implantation.
The International Journal of Advanced Manufacturing Technolgoy 106(2020), pp. 481-501

Spranger, F.; Schirdewahn, S.; de Oliveira Lopes, M.; Merklein, M.; Hilgenberg, K.:
Investigations on TaC Localized Dispersed X38CrMoV5-3 Surfaces with Regard to the Manufacturing of Wear Resistant Protruded Surface Textures.
Lasers in Manufacturing and Materials Processing 7(2020), pp. 38-58

Pilz, F.; Henneberg, J.; Merklein, M.:
Extension of the forming limits of extrusion processes in sheet-bulk metal forming for production of minute functional elements.
Manufacturing Review 7(2020)9, pp. 1-12

Henneberg, J.; Beyer, F.; Willner, K.; Merklein, M.:
Konstitutives Reibgesetz zur Beschreibung und Optimierung von Tailored Surfaces.
In: Behrens, B.-A. (Edtr.): 23. Umformtechnisches Kolloquium Hannover: Aktuelle Entwicklungen im Bereich der Umformtechnik, 2020, published

Hetzel, A.; Lechner, M.:
Lokale Kurzzeitwärmebehandlung zur Erweiterung der Formgebungsgrenzen prozessangepasster Halbzeuge der Aluminiumlegierung AA6016.
In: Bernd-Arno Behrens (Edtr.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 04. und 05. März 2020, TEWISS, 2020, pp. 86-93

Vogel, M.; Schulte, R.; Hetzel, A.; Lechner, M.; Merklein, M.:
Verfahrenskombination zur umformtechnischen Herstellung von verzahnten, dünnwandigen Funktionselementen aus prozessoptimierten Halbzeugen.
In: Bernd-Arno Behrens (Edtr.): Aktuelle Entwicklungen im Bereich der Umformtechnik - 23. Umformtechnisches Kolloquium Hannover 04. und 05. März 2020, TEWISS, 2020, pp. 178

Henneberg, J.; Rothammer, B.; Zhao, R.; Vorndran, M.; Tenner (geb. Steiner), J.; Krachenfels, K.; Häfner, T.; Tremmel, S.; Schmidt, M.; Merklein, M.:
Lubricant free forming with tailored tribological conditions.
Dry Metal Forming Open Access Journal 6(2020), pp. 228-261

Schirdewahn, S.; Spranger, F.; Hilgenberg, K.; Merklein, M.:
Localized laser dispering of titanium-based particles for improving the tribological performance of hot stamping tools.
Journal of Manufacturing and Materials Processing 4(2020)3, pp. 1-19

Henneberg, J.; Merklein, M.:
Investigation on the wear behavior of coatings for lubricant-free deep drawing processes with a novel application-oriented test rig.
Defect and Diffusion Forum 404(2020), pp. 11-18

Schirdewahn, S.; Spranger, F.; Hilgenberg, K.; Merklein, M.:
Laser implantation of niobium and titanium-based particles on hot working tool surfaces for improving the tribological performance within hot stamping.
Defect and Diffusion Forum (2020)404, pp. 117-123

Henneberg, J.; Merklein, M.:
Investigation on extrusion processes in sheet-bulk metal forming from coil.
CIRP Journal of Manufacturing Science and Technology 31(2020), pp. 561-574

Schirdewahn, S.; Spranger, F.; Hilgenberg, K.; Merklein, M.:
Localized dispersing of TiB2 and TiN particles via pulsed laser radiation for improving the tribological performance of hot stamping tools.
In: Procedia CIRP (Edtr.): LANE 2020 - 11th CIRP Conference on Photonic Technologies, 2020, pp. 901-904

Rigas, N.; Merklein, M.:
Experimental investigation of distortion behavior of laser heat treated blanks.
In: Procedia CIRP (Edtr.): LANE2020 - 11th CIRP Conference on Photonic Technologies, 2020, pp. 557-560

Henneberg, J.; Merklein, M.:
Measures for controlling the material flow when extruding sheet-bulk metal forming parts from coil.
Manufacturing Review, DOI: https://doi.org/10.1051/mfreview/2020033 7(2020)36, published

Degner, J.; Böhm, W.; Herrmann, J.; Köhler, M.; Merklein, M.:
Manufacturing and Characterization of Multilayered 7000-Series Aluminum with Improved Corrosion Behavior Processed via Accumulative Roll Bonding.
Materials Today: Proceedings 10(2019)2, pp. 368-375

Graser, M.; Wiesenmayer, S.; Müller, M.; Merklein, M.:
Application of Tailor Heat Treated Blanks Technology in a Joining by Forming Process.
Journal of Material Processing Technology 264(2019), pp. 259-272

Freiburg, D.; Aßmuth, R.; Garcia Carballo, R.; Biermann, D.; Henneberg, J.; Merklein, M.:
Adaption of tool surface for sheet-bulk metal forming by means of pressurized air wet abrasive jet machining.
Production Engineering 13(2019), pp. 71 - 77

Krachenfels, K.; Rothammer, B.; Tremmel, S.; Merklein, M.:
Experimental investigation of tool-sided surface modifications for dry deep drawing processes at the tool radii area.
Procedia Manufacturing 29(2019), pp. 201-208

Neubauer, F.; Merklein, M.:
Tribological and Thermal Investigation of Modified Hot Stamping Tools.
Tribology in Industry Vol.41(2019)1, pp. 76-89

Schwingenschlögl, P.; Niederhofer, P.; Merklein, M.:
Investigation on basic friction and wear mechanisms within hot stamping considering the influence of tool steel and hardness.
Wear 426(2019), pp. 378-389

Krachenfels, K.; Rothammer, B.; Zhao, R.; Tremmel, S.; Merklein, M.:
Influence of varying sheet material properties on dry deep drawing process.
In: (Edtr.): IOP Conference Series: Materials Science and Engineering, 2019, published

Rigas, N.; Degner, J.; Berendt, E. ; Junker, F. ; Merklein, M.:
Characterisation of new lubrication systems for hot forming of high strength aluminum alloys.
In: (Edtr.): IOP Conference Series: Materials Science and Engineering, 2019, published

Merklein, M.; Gröbel, D.; Löffler, M.; Henneberg, J.:
Investigation on blasted tool surfaces as a measure for material flow control in sheet-bulk metal forming.
Manufacturing Review 6(2019)10, pp. 1-9

Horn, A.; Merklein, M.:
Investigation of diffusion behavior of carburized sheet metal in hot stamping.
Manufacturing Rev. 6(2019)16, published online

Horn, A.; Merklein, M.:
Investigation of the Quenching Behavior of Carburized Sheet Metal in Hot Stamping.
In: Oldenurg, M.; Hardell, J.; Casellas, D. (Edtrs.): Hot Sheet Metal Forming of High-Performance Steel - CHS2, Wissenschaftliche Skripten, 2019, pp. 275-282

Schirdewahn, S.; Spranger, F.; Hilgenberg, K.; Merklein, M.:
Tribological performance of localized dispersed X38CrMoV5-3 surfaces for hot stamping of AlSi coated 22MnB5 sheets.
In: Oldenburg, M.; Hardell, J.; Caellas, D. (Edtrs.): Hot Sheet Metal Forming of High-Performance Steel - CHS2, Wissenschaftliche Skripten, 2019, pp. 357-364

Niederhofer, P.; Eger, K.; Schwingenschlögl, P.; Merklein, M.:
Properties of tool steels for application in hot stamping.
In: (Edtr.): Tooling, 2019, published on CD

Graser, M.; Lenzen, M.; Merklein, M.:
On the Inverse Identification of Lankford Coefficients using Geometrical Changes under Quasi-Biaxial Loading .
International Journal of Material Forming; DOI: 10.1007/s12289-019-01498-z (2019), published

Rigas, N.; Junker, D.; Berendt, E. ; Merklein, M.:
Investigation of dry lubrication systems for lightweight materials in hot forming processes.
In: Jens P. Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens (Edtr.): Production at the leading edge of technology. Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, September 30 – October 2, 2019, Springer-Verlag GmbH Berlin Heidelberg, 2019, pp. 43-51

Schwingenschlögl, P.; Merklein, M.:
Tribologische Herausforderungen beim Presshärten.
stahl und eisen, : Maenken Kommunikation GmbH, 2019, 10. Ed.

Hetzel, A.; Schulte, R.; Vogel, M.; Degner, J.; Merklein, M.:
Maßgeschneiderte Halbzeuge - Umformtechnische Herstellung von Funktionsbauteilen zur Realisierung von Leichtbaukomponenten.
Werkstattstechnik online 109 10(2019), pp. 745-749

Schirdewahn, S.; Spranger, F.; Hilgenberg, K.; Merklein, M.:
Untersuchung des tribologischen Einsatzverhaltens von lokal dispergierten Presshärtewerkzeugoberflächen.
In: Merklein, M. (Edtr.): Tagungsband zum 14. Erlanger Workshop Warmblechumformung, 2019, pp. 169-178

Henneberg, J.; Rothammer, B.; Zhao, R.; Vorndran, M.; Tenner (geb. Steiner), J.; Krachenfels, K.; Häfner, T.; Tremmel, S.; Schmidt, M.; Merklein, M.:
Analysis of tribological behavior of surface modifications for a dry deep drawing process.
Dry Metal Forming Open Access Journal 5(2019), pp. 13-24

Schwingenschlögl, P.; Merklein, M.:
Characterization of tribological conditions within direct hot stamping.
Journal of Materials Processing Tech. / 10.1016/j.jmatprotec.2019.116535 (2019), published online

Clausmeyer, T.; Nürnberger, F.; Gutknecht, F. ; Isik, K.; Besserer, H.-B.; Gerstein, G.; Wernicke, S.; Schulte, R.; Tekkaya, A. E.; Merklein, M.; Maier, H. J.:
Analyse und Modellierung von Schädigung und Versagen in der Blechmassivumformung.
In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edtr.): 4. Workshop Blechmassivumformung, FAU University Press, 2019, pp. 33-60

Hinz, L.; Schulte, R.; Pilz, F.; Kästner, M.; Reithmeier, E.:
Quantifizierung der Werkzeugkondition bei der Blechmassivumformung durch faseroptische Streifenprojektion.
In: M. Merklein, B.-A. Behrens, A. E. Tekkaya (Edtr.): 4. Workshop Blechmassivumformung, FAU University Press, 2019, pp. 69-87

Degner, J.; Herrmann, J.; Junker, F.; Berendt, E.; Merklein, M.:
Leichtbauwerkstoffe für den modernen Automobilbau.
Zeitschrift Konstruktion 3(2018), pp. 50-54

Merklein, M.; Löffler, M.; Gröbel, D.; Henneberg, J.:
Material flow control in sheet-bulk metal forming processes using blasted tool surfaces.
In: Qin, Y.; Dean, T.A.; Lin, J.; Yuan, S. J.; Vollertsen, F (Edtrs.): MATEC Web of Conferences, https://doi.org/10.1051/matecconf/201819013003, 190, 2018, published online

Häfner, T.; Rothammer, B.; Tenner (geb. Steiner), J.; Krachenfels, K.; Merklein, M.; Tremmel, S.; Schmidt, M.:
Adaption of tribological behavior of a-C:H coatings for application in dry deep drawing.
In: Vollertsen, F.; Dean, T. A.; Qin Y.; Yuan S. J. (Edtrs.): doi: 10.1051/matecconf/201819014002, MATEC Web of Conferences, 2018, published online

Horn, A.; Merklein, M.:
Investigation of diffusion behavior of carburized sheet metal in hot stamping.
In: Qin, Y.; Dean, T.A.; Lin, J.; Yuan, S. J.; Vollertsen, F (Edtrs.): MATEC Web of Conferences, doi: https://doi.org/10.1051/matecconf/201819008004, 190, 2018, published online

Krachenfels, K.; Tenner (geb. Steiner), J.; Merklein, M.:
Nachhaltige Blechumformung durch Trockentiefziehen.
Werkstattstechnik online 108(2018), pp. 652-656

Horn, A.; Merklein, M.:
Fertigung funktionsoptimierter Bauteile beim Presshärten.
In: M. Merklein (Edtr.): Tagungsband zum 13. Erlanger Workshop Warmblechumformung, ISBN 978-3-00-061149-0, 2018, pp. 157-170

Graser, M.; Pflaum, N.; Merklein, M.:
Influence of a local laser heat treatment on the bending properties of aluminium extrusion profiles.
Procedia CIRP 74(2018), pp. 780-784

Degner, J.; Merten, M.; Merklein, M.:
Numerische Auslegung eines kombinierten Umform- und Abschreckprozesses zur Herstellung hochfester Aluminiumbauteile.
In: Merklein, M. (Edtr.): Tagungsband zum 13. Erlanger Workshop Warmblechumformung 2018, ISBN 978-3-00-061149-0, 2018, pp. 95-104

Merklein, M.; Degner, J.:
Fertigung hochfester Aluminiumbauteile durch Umformen unter Abschreckbedingungen.
EFB-Forschungsbericht Nr. 493, : Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2018, 1. Ed.

Merklein, M.; Graser, M.; Degner, J.; Lechner, M.; Herrmann, J.:
Tailoring material properties in forming technology by a local heat treatment.
In: Gronostajski, Z. (Edtr.): Advanced Metal Forming Processes in Automotive Industry, 2016, pp. 45-52